Request Information
Stainless Steel Port Connector for 1/4" diameter, stainless steel tubing. Ruby and sapphire orifices are swaged in place by proprietary methods. For high pressure applications, the flow should push the orifice into its seating area in the connector.

Port connectors allow for inline connections in stainless tube lines. Additional ferrules and nuts are required to complete the connection.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB82462

Orifice Inner Diameter (I.D.)

 N/A 0.0110 in

Diameter

 N/A 1/4 in

Outside Tubing Diameter

 N/A 1/4 in

Orifice Outer Diameter (O.D.)

 N/A 0.060 in0.0870 in

Material

 N/A Stainless Steel

Orifice Style

 N/A Sapphire Conical Vee-Hole Sharp Edge Ruby Straight-Hole

Product Style

 N/A Port Connector

Product Type

 N/A Orifice Connectors and Fittings

Additional Information

Additional Information

 N/A RB82462 comes with all three orifice styles. Size ranges from 0.0004" thru 0.081".

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033".