Request Information
Stainless Male Orifice Connector for Face Seal and 1/8" Stainless Tubing

Stainless Steel Male Orifice Connector for stainless tubing. Orifices are swaged in place by proprietary method. For elevated pressure the flow should push the orifice into its seat in the connector.

This male connector has straight thread and face seals to the mating connector on one end. The opposite end of the connector has a ferrule and nut for the tube connection.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB82315

Orifice Inner Diameter (I.D.)

 N/A 0.0040 in

Diameter

 N/A 1/8 in

Tube Diameter

 N/A 1/8 in

Orifice Outer Diameter (O.D.)

 N/A 0.0870 in

Material

 N/A Stainless Steel

Thread Type

 N/A National Pipe Thread (NPT) Thread Size

Orifice Style

 N/A Sharp Edge Ruby Straight-Hole

Product Style

 N/A Male Connector

Product Type

 N/A Orifice Connectors and Fittings

Additional Information

Additional Information

 N/A RB82315 is for 1/8" stainless tubing. The male orifice connector comes with orifice sizes from 0.0004" thru 0.081" .

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033"