Request Information
Brass Press-In Insert 0.125" Diameter x 0.110" Long

Press-In Inserts are easy to install into a wide assortment of applications.

These precise inserts typically have a small lead designed into the cartridge to facilitate the insertion. This helps insure alignment before finally driving the insert home.

Ask the Bird staff for other practical information concerning interference fit, tolerances and insertion aids.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB83711

Orifice Inner Diameter (I.D.)

 N/A 0.0165 in

Diameter

 N/A 1/8 in

Press-In Insert Length

 N/A 0.110 in

Orifice Outer Diameter (O.D.)

 N/A 0.060 in

Material

 N/A Brass

Orifice Style

 N/A Sharp Edge Ruby Straight-Hole

Product Style

 N/A Press-In

Product Type

 N/A Precision Orifice Insert

Additional Information

Additional Information

 N/A RB83711 is brass, 0.125" diameter and approx. 0.110" long.

This insert comes in our 0.060" sharp edge ruby orifice series ranging from 0.0004" thru 0.035".

With a Ruby Straight-Hole Orifice (0.060" O.D.)

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.