Bird Precision - RB82929 Series Stainless Steel Orifice Unions - Compare Items

Skip to Content

Stainless Steel Orifice Union Connector for 1/8" diameter Tube.

This is our smallest Orifice union.

Orifice selection can range from 0.0004" thru 0.035".

Request Information

Unit of Measure

Items	RB82929SS-22329 RB82929 Series 0.0004 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Stainless Steel Orifice Union	RB82929SS-22320 RB82929 Series 0.0005 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Stainless Steel Orifice Union	RB82929SS-22023 RB82929 Series 0.0006 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Stainless Steel Orifice Union	RB82929SS-22104 RB82929 Series 0.0008 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Stainless Steel Orifice Union	RB82929SS-22143 RB82929 Series 0.0010 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Stainless Steel Orifice Union
Description	N/A Stainless Steel Orifice Union Connector for 1/8" diameter Tube. This is our smallest Orifice union. Orifice selection can range from 0.0004" thru 0.035".
Brands	N/A Bird Precision
Suggested Pressures	N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)
Series	N/A RB82929
Orifice Inner Diameter (I.D.)	N/A 0.0004 in	N/A 0.0005 in	N/A 0.0006 in	N/A 0.0008 in	N/A 0.0010 in
Diameter	N/A 1/8 in
Tube Diameter	N/A 1/8 in
Orifice Outer Diameter (O.D.)	N/A 0.060 in
Material	N/A Stainless Steel
Orifice Style	N/A Sharp Edge Ruby Straight-Hole
Product Style	N/A Union
Product Type	N/A Orifice Connectors Fittings
Additional Information	N/A Stainless Steel wire mesh filtration is also available if needed. 5, 10, 25, and 43 micron filtration ratings. Pressure should push the orifice into it's seat for best results. This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges. This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.