Bird Precision
Bird Precision
One Spruce Street, P.O. Box 540569
Waltham, MA 02454-0569 USA
Phone: (800) 454-7369
Fax: (800) 370–6308
Email: sales@birdprecision.com
Website: www.birdprecision.com
Print Back
Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block . RB82029 comes in both brass and stainless material. RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring. This part comes with all three orifice styles in sizes from 0.0004" thru 0.081".
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB82029

Orifice Inner Diameter (I.D.)

 N/A 0.0480 in

Diameter

 N/A 0.189 in

Thread Size

 N/A 10-32

Orifice Outer Diameter (O.D.)

 N/A 0.1180 in

Hex Seal Size

 N/A 1/4 in

Material

 N/A Stainless Steel

Orifice Style

 N/A Sharp Edge Ruby Straight-Hole

Product Style

 N/A Face Seal Threaded

Product Type

 N/A Orifice Connectors Fittings

Additional Information

Additional Information

 N/A This fitting is available in stainless steel.

This Sharp Edge Ruby Orifice series is also laser drilled and wire lapped to insure sharp edges, roundness and repeatability.

This orifice series is a good choice for higher pressure and higher flow applications. The orifice is more robust and the orifice range extends up to 0.081"