Bird Precision
Bird Precision
One Spruce Street, P.O. Box 540569
Waltham, MA 02454-0569 USA
Phone: (800) 454-7369
Fax: (800) 370–6308
Email: sales@birdprecision.com
Website: www.birdprecision.com
Print Back
Brass Press-In Insert 0.1568" Diameter x 0.190" Long

Press-In Orifices are easy to install into a wide assortment of applications. These precise inserts typically come with a small lead designed into the cartridge to facilitate the insertion. This helps insure the alignment of the insert before finally driving it home. Ask the Bird technical staff for practical information on interference fits and insertion aids.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB83842

Orifice Inner Diameter (I.D.)

 N/A 0.0230 in

Diameter

 N/A 0.1568 in

Press-In Insert Length

 N/A 0.190 in

Orifice Outer Diameter (O.D.)

 N/A 0.0870 in

Material

 N/A Brass

Orifice Style

 N/A Sapphire Conical Vee-Hole

Product Style

 N/A Press-In

Product Type

 N/A Precision Orifice Insert

Additional Information

Additional Information

 N/A RB83842 is brass, the diameter is 0.1568" and the length is 0.190" long.

This press-in insert is available with our 0.060" diameter sharp edge ruby orifice series, ranging from 0.0004" thru 0.035".

For special request the 0.087" sapphire conical series and the 0.118" sharp edge orifice series are also possible.

With a Sapphire Vee-Hole Orifice (0.087" O.D.)

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033".