Bird Precision
Bird Precision
One Spruce Street, P.O. Box 540569
Waltham, MA 02454-0569 USA
Phone: (800) 454-7369
Fax: (800) 370–6308
Email: sales@birdprecision.com
Website: www.birdprecision.com
Print Back
Brass Press-In Insert 0.187" Diameter x 0.080" Long

Press-In Orifice Inserts are easy to install into a wide variety of applications. These precise inserts typically have a small lead built into the cartridge to facilitate the insertion. This helps insure that the cartridge is aligned before finally driving it home. Ask the Bird staff for interference fit tolerance advice and other insertion aids.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB82818

Orifice Inner Diameter (I.D.)

 N/A 0.0075 in

Diameter

 N/A 0.187 in

Press-In Insert Length

 N/A 0.080 in

Orifice Outer Diameter (O.D.)

 N/A 0.0870 in

Material

 N/A Brass

Orifice Style

 N/A Sapphire Conical Vee-Hole

Product Style

 N/A Press-In

Product Type

 N/A Precision Orifice Insert

Additional Information

Additional Information

 N/A RB82818 is brass. The diameter is 0.187" and the length 0.080".

This insert comes with our 0.060" sharp edge ruby orifice series in sizes ranging from 0.0004" thru 0.035". Please refer to the drop down screen below for available sizes and orifice part numbers. Upon special request the sapphire conical orifice series and the 0.118" ruby series can also be made available.

With a Sapphire Vee-Hole Orifice (0.087" O.D.)

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033".