Print Back
Brass Press-In Insert 0.112" Diameter x 0.120/130" Long

Press-In Inserts are easy to install into a wide assortment of applications.

These precise inserts typically have a small lead designed into the cartridge to facilitate the insertion.

This helps insure alignment before finally driving the insert home.

Ask the Bird staff for other practical information concerning interference fit, tolerances and insertion aids.
Unit of Measure

Specifications

Brands

N/A Bird Precision

Suggested Pressures

N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

N/A RB31317

Orifice Inner Diameter (I.D.)

N/A 0.0330 in

Diameter

N/A 0.112 in

Press-In Insert Length

N/A 0.120 in0.130 in

Orifice Outer Diameter (O.D.)

N/A 0.0870 in

Material

N/A Brass

Orifice Style

N/A Sapphire Conical Vee-Hole

Product Style

N/A Press-In

Product Type

N/A Precision Orifice Insert

Additional Information

Additional Information

N/A RB31317(82284) is brass, 0.112" diameter and approx. 0.120"/0.130" long.

This insert comes with our 0.060" sharp edge ruby orifice series ranging in size from 0.0004" thru 0.035". Also available for higher pressure applications is the conical sapphire series.

With a Sapphire Vee-Hole Orifice (0.087" O.D.)

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033".