Bird Precision
Bird Precision
One Spruce Street, P.O. Box 540569
Waltham, MA 02454-0569 USA
Phone: (800) 454-7369
Fax: (800) 370–6308
Email: sales@birdprecision.com
Website: www.birdprecision.com
Print Back
Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manifold or block . RB82616 comes in brass . RB82616 has a 2-56 thread and 1/8" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. This part comes with our sharp edge ruby orifice series in sizes 0.0004" thru 0.035". Nickel flash plating for enhanced corrosion resistance is extra.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB82616

Orifice Inner Diameter (I.D.)

 N/A 0.0129 in

Diameter

 N/A 0.080 in

Thread Size

 N/A 10-32

Orifice Outer Diameter (O.D.)

 N/A 0.060 in

Hex Seal Size

 N/A 1/8 in

Material

 N/A Brass

Orifice Style

 N/A Sharp Edge Ruby Straight-Hole

Product Style

 N/A Face Seal Threaded

Product Type

 N/A Orifice Connectors Fittings

Additional Information

Additional Information

 N/A This fitting is available in brass.

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.