Bird Precision
Bird Precision
One Spruce Street, P.O. Box 540569
Waltham, MA 02454-0569 USA
Phone: (800) 454-7369
Fax: (800) 370–6308
Email: sales@birdprecision.com
Website: www.birdprecision.com
Print Back
Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manifold or block . RB82616 comes in brass . RB82616 has a 2-56 thread and 1/8" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. This part comes with our sharp edge ruby orifice series in sizes 0.0004" thru 0.035". Nickel flash plating for enhanced corrosion resistance is extra.
RB82616 Series Brass Face Seal Threaded Orifice Connector
Unit of Measure
Items RB82616 Series Brass Face Seal Threaded Orifice Connector
RB82616BR-22329
RB82616 Series 0.0004 Inch (in) Inner Diameter (I.D.) and 0.06 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82616 Series Brass Face Seal Threaded Orifice Connector
RB82616BR-22320
RB82616 Series 0.0005 Inch (in) Inner Diameter (I.D.) and 0.06 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82616 Series Brass Face Seal Threaded Orifice Connector
RB82616BR-22023
RB82616 Series 0.0006 Inch (in) Inner Diameter (I.D.) and 0.06 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82616 Series Brass Face Seal Threaded Orifice Connector
RB82616BR-22104
RB82616 Series 0.0008 Inch (in) Inner Diameter (I.D.) and 0.06 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82616 Series Brass Face Seal Threaded Orifice Connector
RB82616BR-22143
RB82616 Series 0.0010 Inch (in) Inner Diameter (I.D.) and 0.06 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector
Description N/A Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manifold or block . RB82616 comes in brass . RB82616 has a 2-56 thread and 1/8" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. This part comes with our sharp edge ruby orifice series in sizes 0.0004" thru 0.035". Nickel flash plating for enhanced corrosion resistance is extra.
Brands N/A Bird Precision
Suggested Pressures N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)
Series N/A RB82616
Orifice Inner Diameter (I.D.) N/A 0.0004 in N/A 0.0005 in N/A 0.0006 in N/A 0.0008 in N/A 0.0010 in
Diameter N/A 0.080 in
Thread Size N/A 2-56 N/A 10-32 N/A 10-32 N/A 10-32 N/A 10-32
Orifice Outer Diameter (O.D.) N/A 0.060 in
Hex Seal Size N/A 1/8 in
Material N/A Brass
Orifice Style N/A Sharp Edge Ruby Straight-Hole
Product Style N/A Face Seal Threaded
Product Type N/A Orifice Connectors Fittings
Additional Information N/A This fitting is available in brass.

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.