Bird Precision
Bird Precision
One Spruce Street, P.O. Box 540569
Waltham, MA 02454-0569 USA
Phone: (800) 454-7369
Fax: (800) 370–6308
Email: sales@birdprecision.com
Website: www.birdprecision.com
Print Back
Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block.

RB82029 comes in both brass and stainless material.

RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed.

The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring.
RB82029 Series Brass Face Seal Threaded Orifice Connector Fitting
Unit of Measure
Items RB82029 Series Brass Face Seal Threaded Orifice Connector Fitting
RB82029BR-22241
RB82029 Series 0.0050 Inch (in) Inner Diameter (I.D.) and 0.118 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82029 Series Brass Face Seal Threaded Orifice Connector Fitting
RB82029BR-22242
RB82029 Series 0.0055 Inch (in) Inner Diameter (I.D.) and 0.118 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82029 Series Brass Face Seal Threaded Orifice Connector Fitting
RB82029BR-22244
RB82029 Series 0.0060 Inch (in) Inner Diameter (I.D.) and 0.118 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82029 Series Brass Face Seal Threaded Orifice Connector Fitting
RB82029BR-22247
RB82029 Series 0.0065 Inch (in) Inner Diameter (I.D.) and 0.118 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector 		RB82029 Series Brass Face Seal Threaded Orifice Connector Fitting
RB82029BR-22249
RB82029 Series 0.0070 Inch (in) Inner Diameter (I.D.) and 0.118 Inch (in) Outer Diameter (O.D.) Brass Face Seal Threaded Orifice Connector
Description N/A Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block.

RB82029 comes in both brass and stainless material.

RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed.

The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring.
Brands N/A Bird Precision
Suggested Pressures N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)
Series N/A RB82029
Orifice Inner Diameter (I.D.) N/A 0.0050 in N/A 0.0055 in N/A 0.0060 in N/A 0.0065 in N/A 0.0070 in
Diameter N/A 0.189 in
Thread Size N/A 10-32
Orifice Outer Diameter (O.D.) N/A 0.1180 in
Hex Seal Size N/A 1/4 in
Material N/A Brass
Orifice Style N/A Sharp Edge Ruby Straight-Hole
Product Style N/A Face Seal Threaded
Product Type N/A Orifice Connectors Fittings
Additional Information N/A Nickel flash plating for corrosion resistance is an extra.

This Sharp Edge Ruby Orifice series is also laser drilled and wire lapped to insure sharp edges, roundness and repeatability.

This orifice series is a good choice for higher pressure and higher flow applications. The orifice is more robust and the orifice range extends up to 0.081"