Request Information
Stainless Male Orifice Connector for 1/8" stainless tubing x 1/16-27 npt

Stainless Male Orifice Connector for Stainless tubing. Orifices are swaged in place by an proprietary method. For elevated pressure the flow should push the orifice into it's seat in the fitting. See caption on drop down screen below for pressure considerations in selection of orifice styles, under Inquiry.

Male connectors are compression one end and pipe thread opposite.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB82298

Orifice Inner Diameter (I.D.)

 N/A 0.0185 in

Diameter

 N/A 1/8 in

Tube Diameter

 N/A 1/8 in

Orifice Outer Diameter (O.D.)

 N/A 0.060 in

Material

 N/A Stainless Steel

Thread Size

 N/A 1/16-27

Thread Type

 N/A National Pipe Thread (NPT) Thread Size

Orifice Style

 N/A Sharp Edge Ruby Straight-Hole

Product Style

 N/A Male Connector

Product Type

 N/A Orifice Connectors and Fittings

Additional Information

Additional Information

 N/A RB82298 is 1/8" diameter tube x 1/16-27npt opposite.

Orifice sizes can range from 0.0004" thru 0.081"

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.

With a Sapphire Vee-Hole Orifice (0.087 o.d.)

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033"

With a Ruby Straight-Hole Orifice (0.118 o.d.)

This Sharp Edge Ruby Orifice series is also laser drilled and wire lapped to insure sharp edges, roundness and repeatability.

This orifice series is a good choice for higher pressure and higher flow applications. The orifice is more robust and the orifice range extends up to .081".