Filtered Orifice Fittings and Connectors come in many forms. They almost always include a stainless wire mesh filter and ruby or sapphire orifice. Because of the wide range of possibilities designers can eliminate redundant fittings by combining the orifice and filter into one fitting. RB31398-82815 is a stainless male connector for 1/4" tube x 1/4" NPT thread . This fitting has a single stainless steel wire mesh filter. This product comes with all three orifice series.
Unit of Measure
Specifications
Brands |
N/A Bird Precision |
Suggested Pressures |
N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi) |
Series |
N/A RB31398 |
Orifice Inner Diameter (I.D.) |
N/A 0.0035 in |
Tube Diameter |
N/A 1/4 in |
Thread Size |
N/A 1/4 in |
Thread Type |
N/A National Pipe Thread (NPT) |
Orifice Outer Diameter (O.D.) |
N/A 0.060 in |
Material |
N/A Stainless Steel |
Orifice Style |
N/A Sharp Edge Ruby Style |
Product Style |
N/A Filter Orifice Fitting and Connectors |
Product Type |
N/A Filter |
Additional Information
Additional Information |
N/A
Sizes can range from 0.0004" thru 0.081" thru. Filtration choices are 5, 25 and 43 micron. Order under part RB82815 and specify it is with filter. Also available with just the orifice no filter. With a Ruby Straight-Hole Orifice This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges. This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns. |
