Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block . RB82029 comes in both brass and stainless material. RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring. This part comes with all three orifice styles in sizes from 0.0004" thru 0.081".
Unit of Measure
Specifications
Brands |
N/A Bird Precision |
Suggested Pressures |
N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi) |
Series |
N/A RB82029 |
Orifice Inner Diameter (I.D.) |
N/A 0.0110 in |
Diameter |
N/A 0.189 in |
Thread Size |
N/A 10-32 |
Orifice Outer Diameter (O.D.) |
N/A 0.0870 in |
Hex Seal Size |
N/A 1/4 in |
Material |
N/A Stainless Steel |
Orifice Style |
N/A Sharp Edge Sapphire Vee-Hole |
Product Style |
N/A Face Seal Threaded |
Product Type |
N/A Orifice Connectors Fittings |
Additional Information
Additional Information |
N/A
This fitting is available in stainless steel. This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges. This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033" |
