Request Information
Brass Quick Connect Fitting Elbow 1/4" Tube x 1/8-27 NPT Thread with Single Filter & Orifice Slip Fit 1/4" Outside Diameter Tube

Filtered Orifice Fittings and Connectors come in many forms. They almost always include a stainless wire mesh filter and ruby or sapphire orifice depending on type. Because of the wide range of possibilities designers can eliminate redundant fittings by combining the orifice and filter into one fitting. RB31301 (82748) is a brass quick connect fitting for 1/8-27 NPT thread x 0.250" diameter tubing. This fitting has a single stainless steel wire mesh filter, cup shaped to maximize surface area.
Unit of Measure

Specifications

Brands

 N/A Bird Precision

Suggested Pressures

 N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)

Series

 N/A RB31301

Orifice Inner Diameter (I.D.)

 N/A 0.0065 in

Tube Size

 N/A 1/4 in

Tube Diameter

 N/A 0.250 in

Thread Size

 N/A 1/8-27

Thread Type

 N/A National Pipe Thread (NPT)

Orifice Outer Diameter (O.D.)

 N/A 0.060 in

Material

 N/A Brass

Orifice Style

 N/A Sharp Edge Ruby Style

Product Style

 N/A Filter Orifice Fitting and Connectors

Product Type

 N/A Filter

Additional Information

Additional Information

 N/A This product comes with our complete range of sharp edge ruby orifices in sizes 0.0004" thru 0.035". Filtration sizes are 5, 25 and 43 microns. Order under part RB82748. Also available in straight form instead of elbow.

Brass Quick Connect Fitting Elbow 1/4" Tube x 1/8-27 NPT Thread with Single Filter & Orifice Slip Fit 1/4" Outside Diameter Tube.

With a Ruby Straight-Hole Orifice

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.