Brass Threaded Orifice Insert 4-40 thread x 0.177"/0.188" long

Threaded Inserts are easy to install into manifolds, valves and nozzles. They are particularly well suited for deep bore applications.
Request Information
Unit of Measure
Items
Image

RB82344 Series 0.0004 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Threaded Insert
Image

RB82344 Series 0.0005 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Threaded Insert
Image

RB82344 Series 0.0006 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Threaded Insert
Image

RB82344 Series 0.0008 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Threaded Insert
Image

RB82344 Series 0.0010 Inch (in) Inner Diameter (I.D.) and 0.060 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Threaded Insert
Description N/A Brass Threaded Orifice Insert 4-40 thread x 0.177"/0.188" long

Threaded Inserts are easy to install into manifolds, valves and nozzles. They are particularly well suited for deep bore applications.
Brands N/A Bird Precision
Suggested Pressures N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)
Series N/A RB82344
Orifice Inner Diameter (I.D.) N/A 0.0004 in N/A 0.0005 in N/A 0.0006 in N/A 0.0008 in N/A 0.0010 in
Diameter N/A 0.112 in
Thread Size N/A 4-40
Approximate Press-In Insert Length N/A 0.177 in0.188 in
Orifice Outer Diameter (O.D.)
N/A 0.060 in
Material N/A Brass
Orifice Style N/A Sharp Edge Ruby Straight-Hole
Product Style N/A Threaded
Product Type N/A Precision Orifice Insert
Additional Information N/A This small threaded orifice insert comes complete with our sharp edge ruby orifice series in sizes from 0.0004" thru 0.035".

This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges.

This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns.