Brass Press-In Insert 0.125" Diameter x 0.110" Long

Press-In Inserts are easy to install into a wide assortment of applications.

These precise inserts typically have a small lead designed into the cartridge to facilitate the insertion. This helps insure alignment before finally driving the insert home.

Ask the Bird staff for other practical information concerning interference fit, tolerances and insertion aids.
Request Information
Unit of Measure
Items
RB83711 Series Brass Precision Orifice Press-In Insert

RB83711 Series 0.0020 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Press-In Insert
RB83711 Series Brass Precision Orifice Press-In Insert

RB83711 Series 0.0025 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Press-In Insert
RB83711 Series Brass Precision Orifice Press-In Insert

RB83711 Series 0.0030 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Press-In Insert
RB83711 Series Brass Precision Orifice Press-In Insert

RB83711 Series 0.0035 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Press-In Insert
RB83711 Series Brass Precision Orifice Press-In Insert

RB83711 Series 0.0040 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Brass Precision Orifice Press-In Insert
Description N/A Brass Press-In Insert 0.125" Diameter x 0.110" Long

Press-In Inserts are easy to install into a wide assortment of applications.

These precise inserts typically have a small lead designed into the cartridge to facilitate the insertion. This helps insure alignment before finally driving the insert home.

Ask the Bird staff for other practical information concerning interference fit, tolerances and insertion aids.
Brands N/A Bird Precision
Suggested Pressures N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)
Series N/A RB83711
Orifice Inner Diameter (I.D.) N/A 0.0020 in N/A 0.0025 in N/A 0.0030 in N/A 0.0035 in N/A 0.0040 in
Diameter N/A 1/8 in
Press-In Insert Length N/A 0.110 in
Orifice Outer Diameter (O.D.)
N/A 0.0870 in
Material N/A Brass
Orifice Style N/A Sapphire Conical Vee-Hole
Product Style N/A Press-In
Product Type N/A Precision Orifice Insert
Additional Information N/A RB83711 is brass, 0.125" diameter and approx. 0.110" long.

This insert comes in our 0.060" sharp edge ruby orifice series ranging from 0.0004" thru 0.035".

With a Sapphire Vee-Hole Orifice (0.087" O.D.)

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033".