Stainless Steel Port Connector with orifice and filter for 1/4" diameter stainless tubing.
RB31011 (82462) comes with all three Orifice series and with a variety of micron size filters depending on application. Similar filter, orifice combinations are available for stainless tube fittings such as unions, male connectors and face seal components as well.
When ordering please specify that you need the filter and orifice and note sizes of each.
RB31011 (82462) comes with all three Orifice series and with a variety of micron size filters depending on application. Similar filter, orifice combinations are available for stainless tube fittings such as unions, male connectors and face seal components as well.
When ordering please specify that you need the filter and orifice and note sizes of each.
Unit of Measure
Specifications
Brands |
N/A Bird Precision |
Suggested Pressures |
N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi) |
Series |
N/A RB31011 |
Orifice Inner Diameter (I.D.) |
N/A 0.0135 in |
Tube Diameter |
N/A 1/4 in |
Orifice Outer Diameter (O.D.) |
N/A 0.0870 in |
Material |
N/A Stainless Steel |
Orifice Style |
N/A Sapphire Conical Vee Orifice |
Product Style |
N/A Filter Orifice Fitting and Connectors |
Product Type |
N/A Filter |
Additional Information
Additional Information |
N/A
With a Sapphire Vee-Hole Orifice This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges. This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033". |
