RB82029BR-22108
RB82029BR-22108
Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block.
RB82029 comes in both brass and stainless material. RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring. |
| Brands | N/A Bird Precision |
| Suggested Pressures | N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi) |
| Series | N/A RB82029 |
| Orifice Inner Diameter (I.D.) | N/A 0.0230 in |
| Diameter | N/A 0.189 in |
| Thread Size | N/A 10-32 |
| Orifice Outer Diameter (O.D.) | N/A 0.060 in |
| Hex Seal Size | N/A 1/4 in |
| Material | N/A Brass |
| Orifice Style | N/A Sharp Edge Ruby Straight-Hole |
| Product Style | N/A Face Seal Threaded |
| Product Type | N/A Orifice Connectors Fittings |
| Additional Information |
N/A
Nickel flash plating for corrosion resistance is an extra. This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges. This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns. |
