Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manifold or block . RB82616 comes in brass . RB82616 has a 2-56 thread and 1/8" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. This part comes with our sharp edge ruby orifice series in sizes 0.0004" thru 0.035". Nickel flash plating for enhanced corrosion resistance is extra.

Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block.

RB82029 comes in both brass and stainless material.

RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed.

The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring.