Face Seal Threaded Orifice Fittings enable the designer to thread into a port and seal against the face of the manilfold or block . RB82029 comes in both brass and stainless material. RB82029 has a 10-32 thread and 1/4" hex. The orifice is typically mounted in the hex end, but can also be mounted in the thread end as a non standard part if needed. The seal is afforded by means of either a Fluorocarbon (FKM) or buna seal ring. This part comes with all three orifice styles in sizes from 0.0004" thru 0.081".
Unit of Measure
Specifications
Brands |
N/A Bird Precision |
Suggested Pressures |
N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi) |
Series |
N/A RB82029 |
Orifice Inner Diameter (I.D.) |
N/A 0.0200 in |
Diameter |
N/A 0.189 in |
Thread Size |
N/A 10-32 |
Orifice Outer Diameter (O.D.) |
N/A 0.1180 in |
Hex Seal Size |
N/A 1/4 in |
Material |
N/A Stainless Steel |
Orifice Style |
N/A Sharp Edge Ruby Straight-Hole |
Product Style |
N/A Face Seal Threaded |
Product Type |
N/A Orifice Connectors Fittings |
Additional Information
Additional Information |
N/A
This fitting is available in stainless steel. This Sharp Edge Ruby Orifice series is also laser drilled and wire lapped to insure sharp edges, roundness and repeatability. This orifice series is a good choice for higher pressure and higher flow applications. The orifice is more robust and the orifice range extends up to 0.081" |
